Bee Happy Car Sticker/Decal | Bumble Bee | Car Sticker | Funny Car Decal | Sweary Sticker | Gift for her | Car Gift | Car Lover

Bee Happy ! car bumper sticker Vinyl Decal

Size: 5" x 2.7"
(Message for custom size)

Colour: (Select in drop down menu)

Fitting Application: (Select in drop down menu)
*OUTSIDE VEHICLE - Decal fits on the outside of the window, also suitable for bodywork.
*INSIDE VEHICLE - Decal fits on the inside of the window. It's viewable from the outside as normal and is protected from the weather & window wipers.

*** If you are applying your decal to the inside of a window/car window, please select "INSIDE VEHICLE" in the mirrored option. This will allow the decal to be viewed/read correctly from outside of the vehicle/window.

This item is custom made in the UK cut using the best quality vinyl (5-7 years)

Supplied ready to fit, covered with application tape for easy installation. Precision cut from a single colour, meaning these Decals have no background at all, neither white nor transparent.

The vinyl will stick to almost any clean, smooth surface - Car body, Window, Bike, Laptop etc.

The Decals are waterproof and can be used both indoor and outdoor.

Fitting instructions:
1. Prepare surface correctly. Use water to clean. (Avoid using window cleaning liquid/chemicals)
2. Squeegee over Decal, to ensure the clear application tape has a good bond of the vinyl and will lift it from the backing paper.
3. Carefully remove white/blue backing paper, leaving the Decal on clear application tape, if you have any issues lifting the vinyl with the clear application tape, repeat step 2 until it comes up easily.
4. Apply one edge of Decal to surface, slowly lay the rest of the Decal onto surface, a card or similar item will help squeegee the item down. Ensure you have firmly squeegee’d the item onto the surface for best adhesion.
5. Slowly, Remove clear application tape, leaving your new Decal applied to the surface.
Tip. After removing the clear application tape, go around the vinyl with your thumb, ensuring there are no small areas that lifted a little during removal of the clear application tape. The vinyl must be 100% adhered to ensure water cannot ingress.

Any questions or for help and advice or any customisation requests please message us :)